§ 02.04. Administrative subdivision requirements.

Requirements below apply for monumentation, certificates and drafting.

(a)

Subdivisions may be drawn on standard size white paper not smaller than 8½" x 11", at a scale of not more than 400 feet to one inch (1" = 400'). The drawing shall contain a vicinity map, scale, and north arrow, and the name of the owner(s) and drafters of the subdivision.

(b)

Monumentation

(1)

For previously platted areas, a note shall be added to the most recent recorded plat indicating that a change has been made and a drawing indicating the change shall be recorded. The plat must contain a certification by a registered land surveyor that monuments have been or will be set to indicate relocated property lines.

(2)

If the land involved in the subdivision has not previously been monumented, no monumentation is required. In this case, the source of the property description shall be indicated in the surveyor's certificate.

(c)

The plat shall contain a legal description of property to be added to or subtracted from each lot involved.

(d)

The submitted application shall include a quitclaim or warranty deed(s) containing the legal description for each parcel of property for which ownership is transferred within and by the subdivision.

(e)

Any lot included in an administrative subdivision must meet the minimum lot size and setback requirements of the zoning district in which it is located.